GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 6T70/6T75 🢒 Control Valve Body Assembly Assemble
Table 1: Lower and Upper Body Assemble
Table 2: Channel Plate and Upper Channel Plate Assemble

Lower and Upper Body Assemble
Object Number: 1737980 Size: MF

Lower and Upper Body Assemble

Callout

Component Name

1

Control Valve Lower Body Spacer Plate Assembly

Tip
Inspect the upper channel plate bolt through holes for damage or burnelling. Any damage around the PCS switch feed holes could cause leakage around the PCS switch seals. Replace as necessary.

2

Control Valve Upper Body Assembly

3

Control Valve Body Ball Check Valve (Qty: 9)

4

Control Valve Channel Plate Assembly

5

Control Valve Body Bolt 6 x 55 (Qty: 1)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Tighten in sequence to:

Tighten
12 N·m (9 lb ft)

Channel Plate and Upper Channel Plate Assemble
Object Number: 1737982 Size: MF

Channel Plate and Upper Channel Plate Assemble

Callout

Component Name

1

Control Valve Channel Upper Plate Assembly

Tip
Inspect the upper channel plate bolt pass through holes for damage or burnelling. Any damage near the PCS feed holes could cause leaking around the PCS switch seal. Replace as necessary.

2

Control Valve Body Bolt M6 x 35 (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
Hand tighten for alignment, then tighten in sequence to 12 N·m (9 lb ft) after all bolts are installed.

3

Control Valve Body Bolt M6 x 65 (Qty: 5)

Tighten
Tighten in sequence to 12 N·m (9 lb ft).

4

Control Valve Body Bolt M6 x 55 (Qty: 2)

Tighten
Tighten in sequence to 12 N·m (9 lb ft).

Table 1: Lower and Upper Body Assemble
Table 2: Channel Plate and Upper Channel Plate Assemble

Lower and Upper Body Assemble
Object Number: 1737980 Size: MF

Lower and Upper Body Assemble

Callout

Component Name

1

Control Valve Lower Body Spacer Plate Assembly

Tip
Inspect the upper channel plate bolt through holes for damage or burnelling. Any damage around the PCS switch feed holes could cause leakage around the PCS switch seals. Replace as necessary.

2

Control Valve Upper Body Assembly

3

Control Valve Body Ball Check Valve (Qty: 9)

4

Control Valve Channel Plate Assembly

5

Control Valve Body Bolt 6 x 55 (Qty: 1)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
12 N·m (9 lb ft)

Channel Plate and Upper Channel Plate Assemble
Object Number: 1737982 Size: MF

Channel Plate and Upper Channel Plate Assemble

Callout

Component Name

1

Control Valve Channel Upper Plate Assembly

Tip
Inspect the upper channel plate bolt pass through holes for damage or burnelling. Any damage near the PCS feed holes could cause leaking around the PCS switch seal. Replace as necessary.

2

Control Valve Body Bolt M6 x 35 (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Hand tighten for alignment, then tighten in sequence, after all bolts are installed.

Tighten
12 N·m (9 lb ft)

3

Control Valve Body Bolt M6 x 65 (Qty: 5)

Procedure

Tighten in sequence.

Tighten
12 N·m (9 lb ft)

4

Control Valve Body Bolt M6 x 55 (Qty: 2)

Procedure

Tighten in sequence.

Tighten
12 N·m (9 lb ft)