Instrument Panel Tie Bar Replacement. Chevrolet Captiva Sport 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Instrument Panel Tie Bar Replacement

Callout	Component Name
Notice: To avoid damage to the vehicle and/or the components of the instrument panel because of hidden fasteners and retainers the instrument panel must be removed from the vehicle as an assembly. Preliminary Procedure Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement. Remove the instrument panel trim panel assembly. Refer to Instrument Panel Trim Panel Replacement.
1	Instrument Panel Retainer Nut (Qty: 4) Notice: Refer to Fastener Notice in the Preface section. Tighten 20 N·m (15 lb ft)
2	Instrument Panel Retainer Assembly Procedure Note the location and routing of the instrument panel wiring harness to ensure proper reinstallation. Disconnect the instrument panel wiring harness from the instrument panel retainer. When replacing the instrument panel retainer assembly, transfer all necessary components.
3	Instrument Panel Tie Bar Assembly Procedure When replacing the instrument panel tie bar assembly, transfer all necessary components.

Callout	Component Name
Caution: To avoid damage to the vehicle and/or the components of the instrument panel because of hidden fasteners and retainers the instrument panel must be removed from the vehicle as an assembly. Preliminary Procedures Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement. Remove the instrument panel trim panel assembly. Refer to Instrument Panel Trim Panel Replacement.
1	Instrument Panel Retainer Nut (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 20 N·m (15 lb ft)
2	Instrument Panel Retainer Assembly Procedure Note the location and routing of the instrument panel wiring harness to ensure proper reinstallation. Disconnect the instrument panel wiring harness from the instrument panel retainer. When replacing the instrument panel retainer assembly, transfer all necessary components.
3	Instrument Panel Tie Bar Assembly Procedure When replacing the instrument panel tie bar assembly, transfer all necessary components.