Preliminary Procedures

Remove the right and left rear wheelhouse if needed. Refer to Rear Wheelhouse Panel Liner Replacement .

1

Rear Fascia Bolt/Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Fascia Retainer (Qty: 8)

3

Rear Bumper Fascia

Procedure

1. Disconnect electrical connector.
2. Transfer components as necessary.

Preliminary Procedure

Remove the right and left rear wheelhouse if needed. Refer to Rear Wheelhouse Panel Liner Replacement.

1

Rear Fascia Bolt/Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Fascia Retainer (Qty: 8)

3

Rear Bumper Fascia

Procedure

1. Disconnect the electrical connector.
2. Transfer components as necessary.