Power Steering Assist Motor Replacement. Chevrolet Captiva Sport 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Steering 🢒 Power Steering 🢒 Power Steering Assist Motor Replacement

Callout	Component Name
Preliminary Procedures Remove the left instrument panel side trim panel. Refer to Instrument Panel Side Trim Panel Replacement. Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.
1	Power Steering Assist Motor Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 18 N·m (13 lb ft)
2	Power Steering Assist Motor Procedure Disconnect any electrical connectors as needed.

Callout

Component Name

Remove the left instrument panel side trim panel. Refer to Instrument Panel Side Trim Panel Replacement.
Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.

Power Steering Assist Motor Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
18 N·m (13 lb ft)

Power Steering Assist Motor

Disconnect any electrical connectors as needed.

Power Steering Assist Motor Replacement Non-Two Mode Hybrid

Callout	Component Name
Preliminary Procedures Remove the left instrument panel side trim panel. Refer to Instrument Panel Side Trim Panel Replacement. Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.
1	Power Steering Assist Motor Bolt (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 18 N·m (13 lb ft)
2	Power Steering Assist Motor Procedure Disconnect any electrical connectors as needed.