Electronic Power Steering Motor Control Module Replacement. Chevrolet Captiva Sport 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Steering 🢒 Power Steering 🢒 Electronic Power Steering Motor Control Module Replacement

Callout	Component Name
Preliminary Procedures Remove the left instrument panel side trim panel. Refer to Instrument Panel Side Trim Panel Replacement. Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.
1	Electronic Power Steering Motor Control Module Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 11.5 N·m (102 lb in)
2	Electronic Power Steering Motor Control Module Procedure Disconnect any electrical connectors as needed.

Callout

Component Name

Remove the left instrument panel side trim panel. Refer to Instrument Panel Side Trim Panel Replacement.
Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.

Electronic Power Steering Motor Control Module Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
11.5 N·m (102 lb in)

Electronic Power Steering Motor Control Module

Disconnect any electrical connectors as needed.

Electronic Power Steering Motor Control Module Replacement Non-Two Mode Hybrid

Callout	Component Name
Preliminary Procedures Remove the left instrument panel side trim panel. Refer to Instrument Panel Side Trim Panel Replacement. Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.
1	Electronic Power Steering Motor Control Module Bolt (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 11.5 N·m (102 lb in)
2	Electronic Power Steering Motor Control Module Procedure Disconnect any electrical connectors as needed.