Caution: Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:

Preliminary Procedure

1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Remove the seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .

1

Side Impact Inflatable Restraint Nut (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
5 N·m (44 lb in)

2

Inflatable Restraint Module Assembly

Procedure

1. Disconnect the electrical connector.
2. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .

Warning: Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:

Preliminary Procedure

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement.

1

Side Impact Inflatable Restraint Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
5 N·m (44 lb in)

2

Inflatable Restraint Module Assembly

Procedure

1. Disconnect the electrical connector.
2. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping.