GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Engine 🢒 Engine Controls and Fuel - 2.2L or 2.4L 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement

    2. Object Number: 1571757 Size: SH
  2. Remove the evaporative emission (EVAP) canister purge tube from the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Reposition the EVAP canister purge tube out of the way.
  4. Disconnect and reposition the fuel injector wiring harness out of the way .

    5. Object Number: 1581050 Size: SH
  5. Disconnect the engine harness electrical connector from the manifold absolute pressure (MAP) sensor.
  6. Remove the MAP sensor and seal.

Installation Procedure

    Object Number: 1581050 Size: SH
  1. Lubricate the NEW MAP sensor seal with clean engine oil.
  2. Install the MAP sensor into the intake manifold.
  3. Connect the engine harness electrical connector to the MAP sensor.
  4. Position and connect the fuel injector wiring harness.

    5. Object Number: 1571757 Size: SH
  5. Position the EVAP canister purge tube to the intake manifold.
  6. Connect the EVAP canister purge tube to the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service .
  7. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement