GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Transmission 🢒 Automatic Transmission - 2MT70 🢒 Range Selector Lever Cable Bracket Replacement

Removal Procedure
  1. Remove the power inverter module. Refer to Drive Motor Generator Power Inverter Module Removal and Installation

    2. Object Number: 2152488 Size: SH
  2. Disconnect the range select cable (2) from the range select lever.
  3. Release the range select cable retaining clip (1) and remove the cable from the range select cable bracket.

    4. Object Number: 2152747 Size: SH
  4. Remove the bolts (1) securing the range select lever cable bracket.
  5. Remove the range select lever cable bracket (2).

Installation Procedure

    Object Number: 2152747 Size: SH
  1. Install the range select lever cable bracket (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolts (1) securing the range select lever cable bracket, then tighten the bolts to 25 N·m (18 lb ft).

    3. Object Number: 2152488 Size: SH
  3. Install the range select cable to the range select cable bracket. Ensure the range select cable retaining clip (1) is secured in the bracket.
  4. Connect the range select cable (2) to the range select lever.
  5. Adjust the cable. Refer to Range Selector Lever Cable Adjustment.
  6. Install the power inverter module. Refer to Drive Motor Generator Power Inverter Module Removal and Installation