GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Hybrid 🢒 Hybrid Controls - HP5 🢒 Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

    Object Number: 1832048 Size: SH
  1. Turn the ignition OFF.
  2. Disconnect the oil pressure sensor electrical connector.
  3. Remove the oil pressure sensor (1).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1832048 Size: SH
  1. Install the oil pressure sensor (1).

    2. Tighten
    Tighten the oil pressure sensor to 20 N·m (15 lb ft).

  2. Connect the oil pressure sensor electrical connector.

Removal Procedure

    Object Number: 1832048 Size: SH
  1. Turn the ignition OFF.
  2. Disconnect the oil pressure sensor electrical connector.
  3. Remove the oil pressure sensor (1).

Installation Procedure

    Caution: Refer to Component Fastener Tightening Caution in the Preface section.


    Object Number: 1832048 Size: SH
  1. Install the oil pressure sensor (1) and tighten to 20 N·m (15 lb ft).
  2. Connect the oil pressure sensor electrical connector.