Preliminary Procedures

1. Remove the center pillar lower garnish molding. Refer to Center Pillar Lower Garnish Molding Replacement
2. Remove the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement
3. Remove the front door sill plate. Refer to Front Carpet Retainer Replacement .

1

Front Side Door Opening Weatherstrip

Procedure

1. Install the weatherstrip to the pinch-weld flange. Ensure that the weatherstrip is fully seated.
2. Mark the location of the weatherstrip opening when removing from the pinch weld.
3. Align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening.