Ignition Lock Cylinder Control Solenoid Replacement. Chevrolet Captiva Sport 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Captiva Sport 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Ignition Lock Cylinder Control Solenoid Replacement

Ignition Lock Cylinder Control Solenoid Replacement With Electronic Power Steering

Callout	Component Name
Preliminary Procedure Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement.
1	Ignition Lock Cylinder Solenoid Bolt (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Ignition Lock Cylinder Solenoid Procedure Disconnect any electrical connectors as needed. Tip A new ignition lock cylinder solenoid consists of only the solenoid and spring. Do not attempt to remove any roll pins retaining the plunger mechanism. If the plunger mechanism exhibits any signs of damage or wear then replacement of the ignition lock cylinder case will be necessary.

Callout

Component Name

Preliminary Procedure

Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement.

Ignition Lock Cylinder Solenoid Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Ignition Lock Cylinder Solenoid

Procedure

Disconnect any electrical connectors as needed.

Tip
A new ignition lock cylinder solenoid consists of only the solenoid and spring. Do not attempt to remove any roll pins retaining the plunger mechanism. If the plunger mechanism exhibits any signs of damage or wear then replacement of the ignition lock cylinder case will be necessary.

Ignition Lock Cylinder Control Solenoid Replacement With Hydraulic Power Steering

Callout	Component Name
Preliminary Procedure Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement.
1	Ignition Lock Cylinder Solenoid Bolt (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Ignition Lock Cylinder Solenoid Procedure Disconnect any electrical connectors as needed.