Important: Correct adjustment cannot be achieved if the sunroof window is closed from vent position.
Important: Do Not remove or lower headliner to access sunroof window screws.
• | Adjust the front of the sunroof window to 0.0 mm - 1.0 mm (0.0 in - 0.04 in ) below the top surface of the roof panel. |
• | Adjust the rear of the sunroof window to 0.0 mm + 1.0 mm (0 .0 in + 0.04 in ) above the top surface of the roof panel. |
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the sunroof window adjusting screws to 5 N·m (44 lb in).
Note: Correct adjustment cannot be achieved if the sunroof window is closed from vent position.
Note: Do Not remove or lower headliner to access sunroof window screws.
• | Adjust the front of the sunroof window to 0.0 mm - 1.0 mm (0.0 in - 0.04 in ) below the top surface of the roof panel. |
• | Adjust the rear center line of the sunroof window to 2 mm to 3 mm (0.08 in to 0.12 in ) below the top surface of the roof panel. |
Caution: Refer to Fastener Caution in the Preface section.