NEW FIBER PLATES FOR FORWARD AND DIRECT CLUTCH ASSEMBLIES

Model and Year: 1989 CELEBRITY, CAVALIER, CORSICA AND BERETTA WITH THM 125/125C TRANSAXLES

This bulletin covers a New Grooved Fiber Plate for the Direct (618) and Forward (633) Clutch Assemblies to allow faster fluid drain off the fiber plates after the Forward and Direct clutches are released. These new fiber plates must not be used in any THM 125/125C transaxle built prior to the Julian Dates described below.

DATE OF PRODUCTION CHANGE: (Refer to Figure 1)

July 11, 1988 (Julian Date 193) the new fiber plates went into production for all THM 125/125C Willow Run and July 14, 1988 (Julian Date 196) for all Windsor built THM 125/125C transaxles.

SERVICE ACTION: (Refer to Figure 2)

The new fiber plates cannot be used on THM 125/125C transaxles built prior to July 11, 1988 (Julian Date 193) for Willow Run built models and July 14, 1988 (Julian Date 196) for Windsor built models due to specific prior year calibrations. The fiber plates can only be used on THM 125/125C transaxles built after this date.

SERVICE PARTS INFORMATION:

When ordering parts to service the Direct or Forward Clutch Assemblies use the following numbers when replacement of the fiber plates is necessary.

Packaae No. Description ---------- ----------- 8665918 Package - Overhaul Complete 8660168 Fiber Plates

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.