REVEAL MOLDINGS FOR CAVALIER PRO SERVICE NEWS. Chevrolet Cavalier 1989

GROUP 1 - PASSENGER CAR/U-VAN GROUP 2 - TRUCK GROUP 3 - GEO GROUP A - POWERTRAIN GROUP B - PARTS

GROUP 1-B REVEAL MOLDINGS FOR CAVALIER. THERE ARE TWO TYPES OF VINYL REVEAL MOLDINGS AVAILABLE TO TECHNICIANS WHEN MAKING REPAIRS TO A CAVALIER WINDSHIELD OR BACK GLASS. THE ORIGINAL "J" SHAPED MOLDING SHOULD BE USED WHEN THE OLD URETHANE ADHESIVE IS COMPLETELY REMOVED. USE OF THIS MOLDING ENSURES PROPER ALIGNMENT OF THE GLASS IN THE BODY OPENING. A "T" SHAPED REPAIR/REPLACEMENT MOLDING IS USED WITH THE SHORT METHOD OF GLASS INSTALLATION SIMPLY TO REPLACE A DAMAGED REVEAL MOLDING. THE PART NUMBER OF THE CAVALIER REPAIR/REPLACEMENT REVEAL MOLDING IS P/N 22569312. BE SURE TO CHECK PROPER APPLICATION WITH YOUR PARTS PERSON.

PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.

FIGURES: 0

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.