CREAK CONDITION, FRT. SEATS INSTALL NEW SPACER

SUBJECT: FRONT BUCKET SEAT (WHITE VINYL ONLY) CREAK CONDITION DUE TO SPACE BETWEEN PIVOT PIN AND BUSHING

MODEL and YEAR: 1992 CAVALIER WITH AR9 OPTION (CONVERTIBLE ONLY)

THIS BULLETIN CANCELS AND SUPERSEDES DEALER SERVICE BULLETIN NO. 92-269-10, DATED AUGUST 1992. THE CAUSE AND CORRECTION HAVE BEEN REVISED. ALL COPIES OF 92-269-10 SHOULD BE DISCARDED.

APPLICATION: All 1992 Chevrolet "J" series equipped with white vinyl bucket ----------- seats.

CONDITION: Some owners of 1992 "J" cars with AR9 bucket front seats may --------- comment that when making a sharp right or left turn, a creaking noise from the driver seat, and front passenger seat (when occupied) occurs.

CAUSE: Excessive space between the inner front seatback pivot pin and the ----- pivot bushing.

CORRECTION: 1. Put seatback in its most forward position. ---------- 2. From rear of seat, install spacer GM P/N 16743252 on pivot pin.

PART AVAILABILITY:

Parts are currently available from GMSPO.

LABOR OPERATION: T-1818 --------------- LABOR TIME: 0.2 Hours ----------

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.