REVISION: 08/28/95
THIS BULLETIN IS BEING REVISED TO UPDATE PART NUMBER INFORMATION. PLEASE DISCARD BULLETIN 53-15-10 (SECTION 10 - BODY). **********************************************************************
SOME OWNERS MAY COMMENT THAT THE FUEL FILLER DOOR LATCH RETAINER SNAP-IN LEGS ARE LOOSE AND NOT SECURED TO QUARTER PANEL.
QUARTER PANEL WITH OVER-LONG FLANGE AT FUEL FILLER OPENING CREATES DOUBLE METAL THICKNESS WHICH INTERFERES WITH LATCH RETENTION FEATURES.
TO CORRECT THE ABOVE CONDITION, CHECK TO SEE IF THE FUEL FILLER LATCH SNAP-IN LEGS (SEE ITEM 1, FIGURE 1) ARE ENGAGED BY TRYING TO PULL THE LATCH STRAIGHT OUT. IF LATCH PULLS OUT, DO THE FOLLOWING:
1. INSTALL RETAINING CLIP, P/N 22651673, (SEE ITEM 2, FIGURE 1) BETWEEN FUEL DOOR LATCH RETAINING WING TAB AND METAL REINFORCEMENT RING.
2. MAKE SURE LATCHES ARE FULLY SEATED.
3. RETAINING CLIP (SEE ITEM 2, FIGURE 1), MUST BE FULLY SEATED AND INSTALLED WITH THUMB TAB POINTING FORWARD IN CAR POSITION.
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE:
LABOR OPERATION NUMBER: B6000 USE PUBLISHED LABOR OPERATION TIME.
FIGURES: 01 ATTACHMENTS: 00
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1995 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.