- Inspect the oil pan gasket for damage, replace as necessary. The oil
pan gasket is reusable.
- Install the oil pan gasket.
- Install the oil pan.
- Install the oil pan bolts and hand tighten.
- Tighten the oil pan bolts.
Tighten
| • | (1) (M8 X 1.25 X 80) to 24 N·m
(18 lb ft). |
| • | (2) (M8 X 1.25 X 22) to 24 N·m
(18 lb ft). |
| • | (3) (M6 X 1.00 X 25) to 12 N·m
(106 lb in). |
| • | (4) to 26 N·m (19 lb ft). |
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
