- Clean the manifolds in solvent.
Caution: Wear safety glasses in order to avoid eye damage.
- Dry the components with compressed air.
- Inspect the exhaust manifolds for the following:
• | Damage to the gasket sealing surfaces |
• | Damage to the EGR pipe fitting (if applicable) |
• | Damage to the take down studs |
• | Restrictions within the exhaust passages |
• | Broken or damaged heat shields (if applicable) |
- Measure the alignment
or surface flatness of the exhaust manifold flanges using a straight edge
and a feeler gauge. Refer to Engine Mechanical Specifications
.
If the surface flatness is not within specifications, the exhaust manifold
is warped and must be replaced.