Important: When installing the power steering pump, apply a 3 mm bead of Loctite 5900 GM P/N 12346286 sealer or equivalent to the joint at the end of the camshaft carrier housing halves.

Tighten
Tighten the bolts to 26 N·m (19 lb ft).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.