GM Service Manual Online
For 1990-2009 cars only

LOOSE OR MISSING CENTER CAPS ON ALUMINUM WHEELS

SUBJECT: LOOSE OR MISSING CENTER CAPS ON ALUMINUM WHEELS (INSTALL NEW CENTER CAPS)

MODELS: 1995-96 CHEVROLET CAVALIER WITH RPO PG0 1995-96 PONTIAC SUNFIRE WITH RPO PF7 BUILT PRIOR TO OCTOBER 30, 1995

CONDITION:

SOME OF THE ABOVE VEHICLES WITH ALUMINUM WHEELS MAY HAVE CENTER CAPS THAT MAY BE LOOSE OR MISSING.

CORRECTION:

INSTALL NEW CENTER CAPS ON ALL WHEELS. THIS SHOULD BE DONE REGARDLESS OF THE CONDITION OF THE OTHER CAPS. THE OLD CENTER CAPS WILL BE GRAY IN COLOR ON THE BACK SIDE, THE NEW CENTER CAPS WILL BE BLACK ON THE BACK SIDE.

SERVICE PROCEDURE -

1. REMOVE OLD CENTER CAPS CAREFULLY TO PROTECT ALUMINUM WHEELS.

2. IT WILL BE NECESSARY TO THREAD A SCREW OR INSERT A SCREWDRIVER THROUGH THE CENTER OF THE CAP TO FACILITATE REMOVAL.

3. DO NOT PRY AGAINST SIDE OF ALUMINUM WHEEL - DAMAGE WILL RESULT.

PARTS INFORMATION:

P/N 9593110 - CHEVROLET P/N 9593111 - PONTIAC

PARTS ARE EXPECTED TO BE AVAILABLE ON JANUARY 15, 1996.

WARRANTY INFORMATION:

FOR VEHICLES REPAIRED UNDER WARRANTY, USE:

LABOR OPERATION NUMBER: E0027 USE PUBLISHED LABOR OPERATION TIME.

FIGURES: 00 ATTACHMENTS: 00

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1995 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.