SMU - SECTION 6A - REVISED TORQUE SPECIFICATION

SUBJECT: SERVICE MANUAL UPDATE - SECTION 6A - REVISED TORQUE SPECIFICATION FOR ENGINE MOUNT TORQUE STRUT BOLTS

MODELS: 1995-96 CHEVROLET CAVALIER 1995-96 PONTIAC SUNFIRE

THIS BULLETIN IS BEING ISSUED TO REVISE THE TORQUE SPECIFICATION FOR THE ENGINE MOUNT TORQUE STRUT BOLTS FOUND IN SECTION 6A OF THE SERVICE MANUAL.

THE TORQUE SPECIFICATION FOR THE ENGINE MOUNT TORQUE STRUT BOLTS WAS RECENTLY REVISED FOR PRODUCTION AND SERVICE. PLEASE MAKE THE FOLLOWING REVISION:

FIGURE 1

O TORQUE TO 100 N.M (74 LB FT) + 90 DEGREES.

FIGURES: 01 ATTACHMENTS: 00

FIGURE 1: 1. TORQUE STRUT BRACKET ASSEMBLY 2. TORQUE STRUT ASSEMBLY 3. CROSSMEMBER

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1996 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.