| Subject: | Revised Instrument Panel Cluster (IPC) Replacement |
| Models: | 1995 Chevrolet Cavalier with 2.3L Engine (VIN D - RPO
LD2) |
| 1995 Pontiac Sunfire with 2.3L Engine (VIN D - RPO
LD2) |
| 1996-1999 Chevrolet Cavalier |
| 1996-1999 Pontiac Sunfire |
| 1996-1999 Toyota Cavalier |
This bulletin is being issued to add a step to the Instrument
Panel Cluster (IPC) Replacement procedure in the Instrument Panel and Console
sub-section of the Service Manual. Please add this information to your Service
Manual.
The following information has been updated within SI2000. If you are
using a paper version of this Service Manual, please make a reference to this
bulletin on the affected page.
It is necessary to reprogram the theft deterrent system
after IPC replacement. The final step of the installation procedure of the
Instrument Panel Cluster (IPC) Replacement procedure should read "Disengage
the theft deterrent tamper mode. Refer to PASSLOCK Changing - Components
Description in Theft Deterrent."
