Evaporative Emission Vent Valve Replacement for Chevrolet Cavalier 1998

Caution: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

1. Raise the vehicle.
2. Remove the RH engine splash shield.
3. Disconnect the vent solenoid electrical connector.
4. Remove the vent solenoid hose clamp.
5. Disconnect the hose (3) to the vent solenoid (4).
6. Remove the vent solenoid (4) from mounting bracket.

1. Slide the vent solenoid onto the mounting bracket.
2. Lubricate the hose ends with lubricant.
3. Connect the hose (3) to the vent solenoid (4).
4. Connect the vent solenoid hose clamp.
5. Connect the vent solenoid electrical connector.
6. Install the RH engine splash shield.

Caution: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

7. Lower the vehicle.