Tools Required

1. Install the J 28467-360 .
2. Install the J 36462 .
3. Remove engine mount. Refer to Engine Mount Replacement in Engine Mechanical-2.4L.



4. Remove engine mount bracket bolt and bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install engine mount bracket and bolts.

Tighten
Tighten bolts to 102 N·m (75 lb ft).

2. Install engine mount. Refer to Engine Mount Replacement in Engine Mechanical-2.4L.
3. Remove the J 28467-360 .
4. Remove the J 36462 .