Tools Required

J 37868 Camshaft Oil Gallery Plug Installer

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
2. Remove the camshaft housing.

Refer to Intake Camshaft, Housing and Lifter Replacement , for the intake camshaft housing.

Refer to Exhaust Camshaft, Housing and Lifter Replacement , for the exhaust camshaft housing.




3. Disassemble the oil gallery plug as follows:

3.1.	Using a 8.33 mm (21/64 in) bit, drill the oil gallery plug.

3.2.	With a 10.0 mm (0.3937 in) bottoming tap, thread the plug.

3.3.	Install a 10.0 mm bolt into the plug and pull the plug out.

4. Clean the oil gallery plug hole.

1. Assemble the oil gallery plug with the J 37868 Oil Gallery Plug Installer.



2. Install the camshaft housing.

Refer to Intake Camshaft, Housing and Lifter Replacement , for the intake camshaft housing.

Refer to Exhaust Camshaft, Housing and Lifter Replacement , for the exhaust camshaft housing.

3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.