Removal Procedure
- Carefully remove the instrument
panel dimmer switch bezel from the dash.
- Disconnect the electrical connector from the traction control
switch.
- Remove the traction control switch from the instrument panel dimmer
switch bezel. To avoid damage to the instrument panel dimmer switch bezel,
use a flat bladed tool on the back side of the traction control switch to
release the retaining clips.
Installation Procedure
- Install the traction control
switch to the instrument panel dimmer switch bezel.
- Connect the electrical connector to the traction control switch.
- Align the instrument panel dimmer switch bezel to the dash and
carefully press the retaining clips into the correct mounting areas on the
dash.
- Verify the repair. Refer to
Diagnostic System Check - ABS
.