Checks
| Cause
|
Oil Level
| High or Low
|
TV Cable
| Misadjusted, unhooked, bound, or broken
|
Oil Pressure
| See causes
of high or low oil pressure
|
Intermediate Servo (128-137)
|
| • | Seals are cut, damaged, or leaking (128, 132, 134) |
| • | The piston is damaged (133) |
| • | The servo bore in the case is damaged (15) |
| • | The apply pin is too long or too short (129) |
| • | The servo orifice bleed cup plug is missing |
| • | A leak exists between the servo apply pin and the case (129-137) |
|
Intermediate Band (606)
| The servo band apply pin is binding (129)
|
TV Link (22)
| Link is bent or is wrong
|
Control Valve Assembly (21)
|
| • | The TV plunger is binding (367) |
| • | The shift TV valve is binding (308) |
| • | The 1-2 accumulator valve is binding |
|
1-2 Accumulator (419-422)
|
| • | Binding 1-2 accumulator piston (421) |
| • | Broken 1-2 accumulator spring (419) |
| • | The piston seal or groove is damaged (420) |
| • | The 1-2 accumulator bore is damaged (401) |
|
Spacer Plate (20)
|
| • | The spacer plate or the gasket is incorrect (19, 20) |
| • | The gasket is incorrectly installed (19) |
|
Case (15)
| The second oil passage is leaking
|
Case Cover (401)
| The second oil passage is leaking
|
