Checks
| Cause
|
Oil Level
| Incorrect level
|
TV Cable
| Misadjusted, unhooked, bound, or broken (22)
|
Manual Linkage
(701-704)
| Misadjusted
|
Oil Pressure
| Check for causes of high or low oil pressure
|
Intermediate
Servo (128-137)
|
| • | The Piston to case oil seal is damaged (132) |
| • | The servo piston is damaged |
| • | The servo bore in the case is damaged (15) |
|
Accumulator Exhaust Check Valve (125, 126)
| Not seating in the case
|
Spacer Plate (20)
|
| • | The direct clutch feed orifice is plugged or restricted |
| • | The spacer plate or the gaskets are leaking, damaged, or incorrectly
installed (19, 20) |
| • | Incorrect spacer plate (20) |
|
Checkball #5 (16)
| Not seating or missing
|
Case Cover (401)
|
| • | Porosity is in the direct clutch case cover passage |
| • | Case cover gaskets are incorrect (25, 416) |
| • | The driven sprocket support passages are interconnected, leaking,
or restricted (602) |
| • | The driven sprocket support oil seal rings are damaged or are
missing (604) |
| • | The sleeve is loose or is out of position (601) |
|
Direct Clutch (608-617)
|
| • | A leaking checkball (609) |
| • | A damaged checkball capsule (610) |
| • | Damaged or missing seals (612-614) |
| • | A cracked or damaged housing or piston (610, 615) |
| • | A missing or incorrect apply ring (616) |
| • | The wrong number of clutch plates (618) |
|
