GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the console. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.
  2. Reposition the floor carpeting to the rear of the front seat.

  3. Object Number: 302656  Size: SH
  4. Remove the rear floor ducts (3).

Installation Procedure


    Object Number: 302656  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the rear floor ducts (3).
  2. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  3. Install the floor carpeting. Refer to Front Floor Panel Carpet Replacement in Interior Trim.
  4. Install the console. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.