GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

1

Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Wiper/Washer Systems

2

  1. Turn ON the ignition, with the engine OFF.
  2. Turn the windshield wiper/washer switch to HI.
  3. Turn the windshield wiper/washer switch to OFF.

Do the wipers park properly?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

3

Disconnect the windshield wiper/washer switch connector.

Do the wipers park properly?

Go to Step 4

Go to Step 5

4

Replace the windshield wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt.

Did you complete the replacement?

Go to Step 8

--

5

Test the windshield wiper switch on signal circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 8

Go to Step 6

6

Test the windshield wiper switch low/pulse signal circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 8

Go to Step 7

7

Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement .

Did you complete the replacement?

Go to Step 8

--

8

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3