Use the following procedure in order to change any instrument panel bulb, instrument warning bulb, or cluster illumination bulb.

1. Remove the instrument panel cluster. Refer to Instrument Cluster Replacement .




Important: Some bulbs/sockets are LEDS and are soldered to the cluster circuit board.

2. Twist the bulb/socket assembly (2) counterclockwise in order to remove the bulb/socket assembly from cluster.

1. Install the bulb/socket (2) into the cluster.

Turn the socket clockwise in order to tighten the socket.

2. Install the cluster into the instrument panel. Refer to Instrument Cluster Replacement .