Removal Procedure
- Using a flat-bladed tool,
press down at the top of the switch (1) to release the retainer tab.
- Lift up to release the bottom retainer tab and pivot the switch
out of the door trim pad.
- Disconnect the electrical connector (2) from the power
door lock switch (1).
- Remove the power door lock switch (1) from the door trim
pad.
Installation Procedure
- Connect the electrical
connector (2) to the power door lock switch (1).
- Pivot the power door lock switch (1) back into the door
trim panel.
- Install the door lock switch pressing in until fully seated.