GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Cavalier 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Auxiliary Sealing Strip Replacement

Removal Procedure
  1. Pull the roof weatherstrip back from the front auxiliary weatherstrip.

    2. Object Number: 279086 Size: SH
  2. Remove the bolts (3) from the auxiliary weatherstrip.
  3. Using a flat-bladed tool, remove the push-in retainer (2).
  4. Remove the auxiliary weatherstrip (1) from the front column.

Installation Procedure

    Object Number: 279086 Size: SH
  1. Position the auxiliary weatherstrip (1) on the front column.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front auxiliary weatherstrip bolts (3).

    3. Tighten
    Tighten the front auxiliary weatherstrip bolts to 2 N·m (18 lb in).

  3. Install the push-in retainer (2) pressing in until fully seated.