GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Cavalier 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Latch Release Cable Handle Replacement

Removal Procedure

    Object Number: 741016 Size: SH
  1. Remove the release handle cover bolt (2), right or left side.
  2. Remove the release handle cover (1) right or left side.

    3. Object Number: 741018 Size: SH
  3. Remove the remote release handle screws.
  4. Remove the remote release cable from the remote release handle (3).
  5. Remove the remote release handle.

Installation Procedure

    Object Number: 741018 Size: SH
  1. Position the remote release handle (3) in the vehicle.
  2. Install the remote release cable in the remote release handle (3).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the remote release handle screws.

    4. Tighten
    Tighten the release handle screws to 2 N·m (18 lb in).

  4. Install the release handle cover.

    5. Object Number: 741016 Size: SH
  5. Install the release handle cover bolt (2).

    6. Tighten
    Tighten the release handle cover bolt to 1 N·m (12 lb in).