- Remove the four bolts (141) from the intermediate
servo cover (137).
- Remove the oil pipe retainer (140) from the low and reverse clutch
apply oil pipe.
- Remove the servo cover (137) and the servo cover gasket (136).
- Remove the servo piston assembly (133).
- Remove the third accumulator exhaust valve
(126) and the spring (125).
- Remove the retainer ring (135) from the
intermediate servo piston assembly (133).
- Remove the following parts:
• | The retainer washer (130) |
- Remove the inner and the outer servo seals (134, 132).
- Remove the fluid seal ring (128) from the apply pin (129).