Removal Procedure
- Remove the console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages and Console.
- Disconnect the electrical connector (1)
from the park brake warning lamp switch.
- Remove the park brake warning lamp switch mounting screw.
- Remove the switch.
Installation Procedure
- Install the park brake warning lamp switch.
Notice: Refer to Fastener Notice in the Preface section.
- Install the park brake warning lamp switch mounting screw.
Tighten
Tighten the screw to 3 N·m (27 lb in).
- Connect the electrical connector (1) to the switch.
- Install the console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages and Console.