Removal Procedure
- Remove the HVAC module assembly. Refer to
HVAC Module Assembly Replacement
.
- Remove the heat stakes and screws from the upper case assembly.
- Remove
the cam, the cable, and the screws.
- Remove the upper case assembly.
- Remove the actuator and 2 screws from the upper case.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the actuator and 2 screws to the upper case.
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Install the upper case assembly.
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Install
the cam, the cable and the screw.
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Install the HVAC module assembly. Refer to
HVAC Module Assembly Replacement
.