GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 739062  Size: SH
  1. Pull back the rear compartment trim panel to gain access to the amplifier. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
  2. Remove the amplifier nuts.
  3. Remove the amplifier from the bracket.

  4. Disconnect the electrical connector from the amplifier.

Installation Procedure


    Object Number: 739062  Size: SH
  1. Connect the electrical connector to the amplifier.
  2. Install the amplifier to the bracket.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the amplifier nuts.
  5. Tighten
    Tighten the nuts to 3.5 N·m (31 lb in).

  6. Reposition the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.