GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Cavalier 🢒 Body and Accessories 🢒 Seats 🢒 Rear Split Folding Seat Back Cushion Cover and Pad Replacement

Removal Procedure
  1. Remove the split/folding rear seat back. Refer to Rear Split Folding Seat Back Replacement .

    2. Object Number: 875660 Size: SH
  2. Remove the pivot bolt (3) from the seat back frame (2).
  3. Unfasten hook and loop strip retainers on the back cover (1) to access the cover staples.
  4. Remove the stables from the bottom and sides of the cover.
  5. Unfold the bottom and sides of the cover from the seat back frame (2).
  6. Lift up on the seat back cover assembly to remove from the seat back frame (2).

Installation Procedure

    Object Number: 875661 Size: SH
  1. Install the seat back cover assembly to the seat back frame (2).
  2. Fold the bottom and sides of the cover over the seat back frame (2).
  3. Install the stables to the bottom and sides of the cover.
  4. Fold the back side of the cover (1) over the seat back frame (2).
  5. Use firm hand pressure in order to fasten the hook and the loop retainer on the back side of the cover (1).

    6. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the pivot bolt (3) to the frame (2).

    7. Tighten
    Tighten the pivot bolt to 6 N·m (53 lb in).

  7. Install the split/folding rear seat back. Refer to Rear Split Folding Seat Back Replacement .