GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Cavalier 🢒 Body 🢒 Wipers/Washer Systems 🢒 Windshield Wiper Motor Cover Replacement

Removal Procedure
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.

    2. Object Number: 1194806 Size: SH
  2. Remove the wiper motor cover screws.
  3. Remove the wiper motor cover from the wiper motor.
  4. Disconnect the wiper motor electrical connector.

Installation Procedure

    Object Number: 1194807 Size: SH
  1. Apply RTV Sealer in the seal channel of the wiper motor cover.

    2. Object Number: 1194806 Size: SH
  2. Position the wiper motor cover onto the wiper motor.
  3. Connect the wiper motor electrical connector.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the wiper motor cover screws.

    5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  6. Inspect the wipers for proper operation.