REMOVAL OF FIXED ARM REST ON STANDARD BENCH SEATS

The following procedure can be used for removal of the fixed arm rest on standard bench seats (Figures 1 and 2).

(1) Peel back the console tray carpeting to expose the two (2) console tray attaching screws.

(2) Remove screws and console tray.

(3) Remove arm rest support attaching nuts.

(4) Remove arm rest.

(5) Re-install attaching nuts and washers.

(6) Re-install console tray and attaching screws.

(7) Re-attach console tray carpet.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.