REVERSE GEAR DISENGAGEMENT BENT INTERNAL SHIFT LEVER

VEHICLES AFFECTED: 1984 'T' Series Equipped With Four Speed Manual Transmission

Some of the subject vehicles may experience a disengagement from reverse gear during some reverse maneuvers.

This condition may be caused by a bent internal transmission reverse shift lever. On vehicles exhibiting the above condition the following parts should be replaced.

Part P/N ---- --- - Reverse Shift Lever Assembly 14066429 - Reverse Gear 358453 - Reverse Idler Gear 361642 - Reverse Idler Shaft 376298 - Reverse Counter Gear 361636

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.