Name | Location | Locator View | Connector End View |
---|---|---|---|
Electronic Brake Control Module (EBCM) (ABS-Air) | On a bracket, on the left side, upper exterior bulkhead, on the top of the air brake application valve | -- | |
C1 (30 cavities) | In the electronic brake control harness, to the EBCM | ||
C2 (18 cavities) | In the electronic brake control harness, to the EBCM | ||
Electronic Brake Control Module (EBCM) (ABS-Hydraulic) | On the inboard side of the left frame rail, to the rear of number one crossmember, on the bracket | -- | |
C1 (2 cavities) | In the electronic brake control harness, to the EBCM | ||
C2 (24 cavities) | In the electronic brake control harness, to the EBCM | ||
Engine Exhaust (EE) Brake/ Air Interlock Relay | In the flasher/ relay center, position 2-B | ||
Engine Exhaust (EE) Brake Solenoid Valve | On the left rear side of the back-of-the-cab crossmember | ||
Engine Exhaust (EE) Brake Switch | On the center of the IP | ||
Powertrain Control Module (PCM) (Cat® Diesel) | On the left rear side of the engine block | ||
C107 (7 cavities) (ABS-Air) | In the IP harness, to the chassis jumper harness (ABS-Air), approximately 33 cm (13 in) from P100 | -- | |
C112 (2 cavities) (Cat® Diesel) | In the engine harness, to the engine exhaust brake harness, near the frame rail, by the starter | -- | |
C200 (56 cavities) (Cat® Diesel) | In the IP harness, to the engine harness, under the right side of the IP | -- | |
C202 (6 cavities) (Cat® Diesel) | In the IP harness, to the IP-to-chassis jumper harness (ABS-air), under the IP, on the right side of the steering column | -- | |
G101 (Cat® Diesel) | From the starter motor end ground stud (G101) to the right frame rail ground (G100) | -- | -- |
P100 | On the right side of the bulkhead | -- | -- |
P103 | On the left side of the bulkhead | -- | -- |
S142 (Cat® Diesel) | In the engine harness, approximately 4 cm (1.6 in) | -- | -- |
S220 | In the IP harness, approximately 15 cm (5.9 in) to the right of the data link connector (DLC) breakout | -- | -- |
S221 | In the IP harness, approximately 12 cm (4.7 in) to the right of the data link connector (DLC) breakout | -- | -- |
S250 (Cat® Diesel and ABS-Air Brakes) | In the IP harness, approximately 16 cm (6.3 in) from the exhaust brake/ air interlock relay connector, by the MaxiFuse® block/ mini-relay center | -- | -- |
S252 (Cat® Diesel) | In the IP harness, approximately 9 cm (3.5 3.5 in) from MaxiFuse® block 1, toward the flasher/ relay center | -- | -- |