- Remove ignition coil attaching
nut and bolt.
- Remove the ignition coil.
- Remove the throttle body
bolts (1).
- Remove the throttle body (2).
- Remove the throttle body gasket (3).
- Remove the EGR valve nuts
(1).
- Remove the EGR valve (2).
- Remove the EGR gasket (3).
- Remove the EGR valve studs (4) (if required).
- Remove the MAP sensor bracket nuts.
- Remove the MAP Sensor and bracket.
- Remove the water inlet
housing bolts and stud.
- Remove the water inlet housing.
- Remove the engine coolant thermostats with O-rings.