For 1990-2009 cars only
Ignition 1 Signal: The scan tool displays the current
voltage at the battery.
GEN L--Terminal Signal Command 8.1L Only: The scan tool displays OK/No Output. The scan tool displays OK until malfunction is detected on the generator L terminal circuit, then it reads No Output.
GEN F--Terminal Signal 8.1L Only: The scan tool displays 0%-100%. The scan tool displays 0%-5% until the engine is running, then the percentage value varies depending on electrical loads.
GEN L--Terminal Signal Command 8.1L Only: The scan tool displays OK/No Output. The scan tool displays OK until malfunction is detected on the generator L terminal circuit, then it reads No Output.
GEN F--Terminal Signal 8.1L Only: The scan tool displays 0%-100%. The scan tool displays 0%-5% until the engine is running, then the percentage value varies depending on electrical loads.
