GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Chevrolet C-Series Medium Duty Truck B7 🢒 Body and Accessories 🢒 Body Front End 🢒 Surge Tank Pipe Replacement - Inlet

Removal Procedure
  1. Remove the front wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Front End.

    2. Object Number: 198949 Size: SH
  2. Remove the front intake air duct (1) from the air filter housing.
  3. Drain the coolant. Refer to Cooling System Draining and Filling .

    4. Object Number: 199119 Size: SH
  4. Remove the radiator surge tank inlet hose and the clamp.
  5. Remove the surge tank inlet pipe.
  6. Inspect the following components for cracks or leaks:
    7. • The radiator
    • The surge tank
    • The pipes
    • The hoses

Installation Procedure

    Object Number: 199119 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the radiator surge tank inlet hose and the clamp.

    2. Tighten
    Tighten the radiator surge tank hose clamp to 3 N·m (27 lb in).


    Object Number: 198949 Size: SH
  2. Install the front intake air duct (1) to the air filter housing.
  3. Install the front wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Front End.
  4. Fill the cooling system. Refer to Cooling System Draining and Filling .
  5. Check the system for leaks.