GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Chevy C Cab/Chassis HD (GMT 400) 🢒 Engine 🢒 Engine Mechanical - 8.1L 🢒 Drive Belt Idler Pulley Replacement

Removal Procedure

    Object Number: 704644 Size: SH
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. If equipped with air conditioning (A/C), remove the drive belt idler pulley bolt.
  3. Remove the drive belt idler pulley.

    4. Object Number: 745526 Size: SH
  4. If equipped without A/C, remove the drive belt idler pulley bolt.
  5. Remove the drive belt idler pulley .

Installation Procedure

    Object Number: 745526 Size: SH
  1. Install the drive belt idler pulley.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. If equipped without A/C, install the drive belt idler pulley bolt.

    3. Tighten
    Tighten the drive belt idler pulley bolt to 50 N·m (37 lb ft).


    Object Number: 704644 Size: SH
  3. If equipped with A/C, install the drive belt idler pulley.
  4. Install the drive belt idler pulley bolt.

    5. Tighten
    Tighten the drive belt idler pulley bolt to 50 N·m (37 lb ft).

  5. Install the drive belt. Refer to Drive Belt Replacement .