Removal Procedure
- Remove the storage compartment. Refer to
Instrument Panel Storage Compartment Replacement
.
- Pull the retaining tabs (1) toward the back of the vehicle in
order to release the vehicle speed sensor (VSS) module (2).
- Remove the VSS module (2) from the instrument panel carrier.
- Disconnect the electrical connector (3) from the VSS module (2).
- Remove the VSS module (2) from the vehicle.
Installation Procedure
- Install the vehicle speed sensor (VSS) module (2) to the vehicle.
- Connect the electrical connector (3) to the VSS module (2).
- Position the VSS module (2) to the instrument panel carrier
retaining tabs (1).
- Install the storage compartment. Refer to
Instrument Panel Storage Compartment Replacement
.