GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Chevy C Cab/Chassis HD (GMT 400) 🢒 Suspension 🢒 Front Suspension 🢒 Front Axle Tie Rod Replacement

Removal Procedure

    Object Number: 689038 Size: SH
  1. Raise the vehicle. Support the vehicle with suitable safety stands.
  2. Remove the bolts (1) retaining the axle tie rod to the vehicle.
  3. Remove the axle tie rod (2).

Installation Procedure

    Object Number: 689038 Size: SH
  1. Install the axle tie rod (2) to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts (1) retaining the axle tie rod to the vehicle.

    3. Tighten
    Tighten the retaining bolts to 160 N·m (118 lb ft).

  3. Remove the safety stands.
  4. Lower the vehicle.