A rattling or clicking noise is coming from the clutch or the transmission there may be oil on the driven plate damper or the clutch disc. The clutch disc may have damaged or weak disc plate springs and diaphragm springs. If there is still more rattling, there might be internal transmission concern.
The number(s) below refer to the step number(s) on the diagnostic table.
This step explains there parts and the operation of the clutch system.
This step checks for oil leaks in the clutch system.
Step | Action | Yes | No | ||||
---|---|---|---|---|---|---|---|
DEFINITION: A rattling or clicking noise is coming from the clutch or the transmission. | |||||||
Did you review the clutch symptom operations and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Clutch | |||||
Inspect for transmission fluid on the driven plate damper. Is there fluid on the driven plate damper? | Go to Step 4 | Go to Step 3 | |||||
3 | Inspect the transmission for noise. Is the transmission OK? | Go to Step 5 | Go to Transmission Replacement in NV-4500 | ||||
4 | Fix the leak source. Refer to Clutch Assembly Replacement Install a new driven disc. Does the clutch still rattle? | Go to Step 5 | System OK | ||||
5 | Remove the clutch disc and check for the following conditions:
Is the diaphragm springs damaged or the clutch disc warn? | Go to Step 6 | System OK | ||||
6 | Replace the necessary components. Refer to Clutch Assembly Replacement . Did you find and repair the condition? | Go to Step 7 | Go to Diagostic Aids | ||||
7 |
Did you correct the condition? | System OK | Go to Step 1 |